FasTest Tool Deactivated

FasTest Tool

The FasTest Tool eliminates the flooding of the entire pipeline where only the test of a weld is required.

When welding in a flange, valve, ‘tee’ or replacement piece of pipe, the weld normally is radiographed and/or pressure tested to assure the integrity of the repair or installation. The chosen method of assurance is up to the operator of the pipeline.

When using the FasTest Tool it is simply inserted to the proper depth, bridging the area of the weld. It is then activated and hydrostatic pressure is applied in the annulus. The amount of applied pressure is registered by an external gauge. The success or failure of the weld will be quickly indicated by static pressure or pressure loss.

FasTest Tool Activated

No flanges or other pipe fittings are needed for the test, therefore no mistakes are likely when planning on this type of test. The test period is much shorter in duration since the entire pipe with its entrained gas, temperature fluctuations, etc., is eliminated.

The volume of water needed for testing is minimal, frequently only one gallon or less. The problem of getting rid of polluted water from testing the whole pipeline is also eliminated.

Once the hydrostatic test is completed the tool is easily and quickly removed from the pipe.